What to do with Bathtubs that Won’t Drain

Originally posted 2010-11-26 08:31:10. Republished by Blog Post Promoter

As one of the most used plumbing fixtures in the home, a bathtub that won’t drain can be a very frustrating experience. Common causes of a clogged bathtub drain are hair, soapy sediment, and cleaning products that accumulate in the drain. A clogged bathtub drain will affect everyone in the household. Fortunately, there are number of things a homeowner can do to clear a clogged bathtub drain.

The following is a list of tips to fixing a bathtub that won’t drain:

1. Most clogs begin in the strainer. The first thing you can do is check the strainer on the drain if you have one. Use a screwdriver to remove the screws and clear out any accumulated hair and debris. Once complete, run the water to see if the problem is resolved.

2. You can use a plunger to unclog the bathtub. Fill the tub with <a href="http://www.napoleon.cc/cottage/”target=”_blank”rel=”external”title=”Midland Cottage Inspections” >water high enough so that the head of the plunger will be submerged in the water. Place the lip of the plunger head over the drain hole. Using forceful thrusts push on the plunger. Repeatedly plunge until you clear the clog and then run hot water through the drain to see if you cleared the clog and the water is continuously running through the pipes.

3. Pour a drain cleaner in the bathtub drain. There are chemical drain cleaners on the market, however, some cleaners are corrosive and can damage the pipes. There are natural drain cleaners on the market that will clear a clog without harming the septic system. You can also make a homemade drain cleaner that consists of pouring a half cup of white vinegar and a half cup of baking soda. If it is a tough clog, it may have to sit overnight. After sitting, run hot water through the plumbing system to clear out any loosened and broken up debris.

4. Using a manual snake is effective at clearing a stubborn bathtub drain clog. First, use a screwdriver to remove the screws that are securing the trip lever face plate. Pull the face plate forward (towards you) and take out the drain stop. Then, unscrew and take out the bathtub drain grate. Feed the snake with the auger head going in first. Feed the snake through the drain system until you reach the blockage. Manipulate the snake so that you are grasping and loosening the clog. Push the snake auger head through the clog. Then, retract the snake and pull the clog out. Once you have the clog removed, run the faucet with hot water to get rid of any remaining pieces of debris.

The method you choose to clear a bathtub drain depends on your personal preference and the nature of the clog. With a little ‘know how,’ clearing clog bathtub drains can be quite easy, however, if you have tried all methods and your bathtub still won’t drain, you should call a professional plumber who will have the skills and knowledge to find the cause of the problem and make the repair.

Searching online for a local plumber to fix your drains and plumbing problems? Then be sure to contact the plumbing professionals at Mr.Rooter, offering full services 24 hours a day! From plumber Sidney to plumber Hope problems, Mr.Rooter has you covered coast to coast!

Be the first to comment

Leave a Reply